Settings Copy Tool (RTR-500)
Application which allows users to copy settings from one Base Unit to another within the same series (between the RTR-500 series or between the RTR500BW units).
Application which allows users to copy settings from one Base Unit to another.
It can be used when replacing a broken Base Unit or changing a Base Unit model. When copying settings between different models, only settings common to both models will be copied.
Settings for the RTR500BW can only be copied to another RTR500BW and not to/from any of the other (older) models.
|Compatible Products||RTR500BW, RTR-500MBS-A, RTR-500DC, RTR-500NW/AW|
|Version||Ver. 1.04 (January 14, 2021)|
|File Size||10.4 MB|
|Microsoft Windows 11 64bit English|
Microsoft Windows 10 32/64bit English
Microsoft Windows 8 32/64bit English
Microsoft Windows 7 32/64bit English
|Replication||Copying to another media is expressly forbidden|
|*1: For installation, it is necessary to have Administrator (Computer Administrator) rights.|
- Double-click the update package to extract it to your hard drive.
- Follow instructions in Set up Program.
- Program will automatically be installed on the Hard Disk.
Ver. 1.04 January 14, 2021
- Added support for the RTR500BW.
Ver. 1.03 April 22, 2019
- Updated the USB driver.
Ver. 1.02 December 14, 2018
- Updated the USB driver.
Ver. 1.01 August 28, 2018
- Fixed a problem that caused copying of RTR-500MBS-A settings to fail.
Ver. 1.00 February 06, 2018
- First Release
- Although T&D Corporation has carried out operational tests on T&D Graph, hereafter referred to as "the software", we cannot guarantee that all operations will work properly under all conditions.
- T&D Corporation shall not accept any responsibility for any damage whether direct or indirect that results from the usage of the software.
- Specifications of the software may be subject to change and service may be terminated without advance notice to the user. In such a case T&D Corporation shall not be responsible for any damages whether direct or indirect from the inability to use the software.
- T&D Corporation has no obligation to correct any defects found in the software.
- All copyrights for the software, including all of the programs and all related documents, are the sole property of T&D Corporation.
- The software is for use free of charge. Redistribution is permitted as long as it is to others for non-profit. In this case, all terms and conditions as written in the above disclaimers automatically transfer and hold true and valid for the party to which the program was redistributed. Please note that if you wish to commercially redistribute the program please contact your local distributor or T&D representative.
- The reprinting or redistribution for commercial purposes whether in part or in whole, in magazines or as a part of any product is strictly forbidden without the expressed consent of T&D Corporation. Any inquiries concerning commercial redistribution should be directed to the Sales Department of T&D Corporation.
- Please do not attempt to make any changes or modifications to the software.