T&D Graph
A powerful graphical tool for viewing and analyzing data recorded by T&D data loggers.
Details
A powerful graphical tool for viewing and analyzing data recorded by T&D data loggers.
It allows you to search, filter and merge data, write comments and print graphs, and has a host of other features. It is also possible to download recorded data from the T&D WebStorage Service for archiving and management.
| Compatible Products | RTR500B Series, TR7A2 Series, TR-7nw Series, TR4A Series, TR32B, MCR Series, TR-5i Series, TR-7Ui Series RTR-500 Series, TR7A Series, TR-7wb Series, TR-7wf Series, TR41/42, RTR-322, RTR-5 Series, RTR-7 Series, TR-5 Series, TR-5S Series, TR-700W Series, TR-71U/72U, TR-7S Series, TR-7W Series, TR-81, VR-71(Excluding Event Data) |
|---|---|
| Version | Ver. 1.19.1 (September 20, 2024) |
| File Name | app-tdgraph-1191-all.exe |
| File Size | 39.1 MB |
| Operating Environment | |
| Microsoft Windows 11 64bit English Microsoft Windows 10 32/64bit English | |
| Copyright | T&D Corporation |
| Replication | Copying to another media is expressly forbidden |
| *1: For installation, it is necessary to have Administrator (Computer Administrator) rights. | |
Installation Procedure
- Double-click the update package to extract it to your hard drive.
- Follow instructions in Set up Program.
- T&D Graph will automatically be installed on the Hard Disk.
Revision History
Ver. 1.19.1September 20, 2024
-
- Fixed a problem that occurred when opening TR7A2 series data via T&D WebStorage Service, where the “Upper Limit” and “Lower Limit” settings that could be displayed in the channel list might not be displayed correctly.
- Fixed a problem that occurred when opening the [File] menu - [T&D WebStorage Service] and logging in, where TR7A2 series recorded data that was manually sent from the T&D Thermo app appeared in the device list.
Ver. 1.19.0September 10, 2024
-
- Added support for TR71A2, 72A2 and 75A2.
- Updated the Help file.
Ver. 1.18.4Dec 21, 2023
-
- Fixed a problem that caused abnormal program termination when used in an environment where the Recent Files function was disabled on Windows.
- Fixed a bug where the [Cancel] button on the screen was displayed in Japanese when communicating with the T&D Data Server.
- When uninstalling the T&D Graph, only the installed files are deleted now instead of the entire installation folder.
Ver. 1.18.2Jun 27, 2023
-
- Fixed the following problems that occurred when downloading data from T&D WebStorage Service:
- The upper/lower limit setting values were displayed incorrectly in Fahrenheit (°F) for the TR7A, TR-7nw, TR-7wb, and TR-7wf series.
- The upper/lower limit display did not correctly reflect the warning enable/disable setting for the TR7A series.
- The sign (+/-) in front of the daylight saving time value was incorrect for the TR7A, TR-7nw, TR-7wb, and TR-7wf series. (This does not affect the display on T&D Graph.)
- The TR41/42/45 monitoring data (which was uploaded from the ThermoREC App to T&D WebStorage Service) was displayed in Celsius (°C) in T&D Graph when the logger was set to Fahrenheit (°F) in the temperature unit setting.
- Fixed the following problems that occurred when downloading data from T&D WebStorage Service:
Ver. 1.18.1Jun 1, 2023
-
- Fixed a problem that occurred when opening the TR32B data via T&D WebStorage Service, where Channel 2 (humidity data) was missing in the downloaded data.
Ver. 1.18.0May 9, 2023
-
- Added support for TR32B.
- The position of the “Axes Selection” and “Shape Selection” dialog boxes (found under the Edit menu) are now reset at software startup.
- Fixed a problem that occurred when selecting the "Display time in Daylight Savings Time" option under "Date Format Settings" after the graph layout had been changed, where the daylight savings time was not correctly reflected in the graph time.
Ver. 1.17.3March 1, 2023
-
- Changed the message displayed when creation of the settings folder fails on first startup.
- Updated the Help file.
Ver. 1.17.2November 30, 2022
-
- Fixed a problem that occurred when downloading files from T&D Data Server with the “Merge Channels” option enabled. If data with overlapping times were included, a problem was fixed where a duplicate piece of data could be inserted in the merged part.
- Fixed a problem where Microsoft Visual Studio C++ 2015-2019 (x86) could not be installed if a newer version of Microsoft Visual Studio C++ 2015-2019 (x64) was installed.
Ver. 1.17.1November 7, 2022
-
- Fixed the following problems that occurred in Ver.1.17.0 of T&D Graph.
- When opening the recorded data for TR-55i, RTR-505, or RTR505B after scale conversion, the unit of measurement before conversion was displayed.
- The size of the graph area remained the same as when the layout was saved.
- Fixed the following problems that occurred in Ver.1.17.0 of T&D Graph.
Ver. 1.17.0August 25, 2022
-
- Added [Graph Layout] to the [View] menu, which allows users to save the changes made to the y-axis, x-axis, graph title, legend, and margin properties.
- Added [Axis Usage for Channels] to the [Settings] - [Options] menu, which allows users to select whether to display temperature and humidity channels on the same Y-axis.
- The number of decimal places shown on the scale is now adjusted according to the recorded data.
- Fixed a problem that occurred when making the scale conversion settings for one channel while opening multiple channels, where the properties of other channels also displayed that same scale conversion equation.
- Changed the following menu item name in the [File] menu: from “Web Storage Service” to “T&D WebStorage Service”.
- Added a message that appears when file associations cannot be changed in the [Settings] - [T&D Graph File Associations] menu, indicating that the selected file type is associated with another application.
- Fixed a problem that occurred when opening the TR43A data via T&D WebStorage Service, where Channel 2 was missing in the downloaded data.
- Fixed a problem where the time was displayed in the popup window even when setting "Display Time" to "No" in the [Settings] - [Option] - [Data Popup Display] settings.
- Updated the “Welcome to T&D Graph” message that appears when the software is started.
- Other small fixes.
Ver. 1.16.0Jun 21, 2022
-
- Added support for TR41A/42A/43A.
- Added a Help button to the MKT Calculator.
- Removed the Help button from the Data List Settings window.
- Recorded data with 10 or more vertical axes can no longer be saved.
Ver. 1.15.0May 23, 2022
-
- Fixed a problem that caused a calculation error in MKT Calculator when data in the same channel were merged and had a blank space.
- Corrected the name of MKT Calculator (from MktCalculator).
- Fixed a problem that occurred when opening data stored in T&D Data Server, data was not displayed correctly in a graph in the following conditions: (1) when the [Merge Channels] box was checked (2) when merging data with different recording intervals or a blank space between data entries.
Ver. 1.14.0November 30, 2021
-
- Added support for the TR75A.
- Fixed a problem that occurred when saving the graph data with speech bubbles, the position information of the bubbles was not saved correctly.
Ver. 1.13.0June 29, 2021
-
- Added support for the TR7A Series.
- Changed the message displayed when a communication error with the server occurred.
Old message:
Failed to login to T&D WebStorage Service.
0×80004005
New message:
Communication with the server failed. Please wait and try again. If after trying a few times there is no improvement, please contact your local distributor.(Code:80004005)
Ver. 1.12.0 April 19, 2021
-
- It is now possible to download and open RTR500B Series Remote Unit data which is stored on T&D Data Server.
- Fixed a problem that caused abnormal program termination when opening the properties of the channel with scale conversion settings, and then opening the properties of the channel without scale conversion settings.
Ver. 1.11.0 December 7, 2020
-
- Added support for the RTR500B series.
- When opening recorded data of single channel data loggers in the RTR500B and RTR-500 series, the channel name no longer contains “Ch.1” in the display.
- The “Submit Feedback” function has been removed.
Ver. 1.10.0 Sep 25, 2020
-
- Added support for the RTR500B Series Remote Units.
- It is now possible to open data in the T&D WebStorage Service using a Read-Only ID.
Ver. 1.09.3 July 16, 2019
- Cumulative illuminance and cumulative UV data are now displayed as channels.
Ver. 1.09.2 June 24, 2019
- Fixed a problem where a graph file (.trg) could not be opened which was saved after deleting an axis.
Ver. 1.09.0 February 05, 2019
- Added support for the TR-71wb, TR-72wb and TR-75wb.
Ver. 1.08.0 March 30, 2018
- Added a selection in the Y-Axis Properties for displaying the unit of the axis.
- When opening a file, separate Y-axes for each channel in the file are displayed automatically now.
- Other small fixes and improvements.
Ver. 1.07.0 November 22, 2017
- Added a function to communicate with the T&D Data Server to download data.
- Added a function to automatically display the data list when opening the graph.
- Added a function to delete undisplayed data after zooming the graph.
Ver. 1.06.0 June 23, 2017
- Added support for the TR-75wf and TR-75nw.
Ver. 1.05.1 January 17, 2017
- Added support for the TR41, TR42 and TR45.
Ver. 1.04.3 November 13, 2015
- Fixed a problem that occurred when opening a .trz file under certain conditions, where the Y-axis Range Setting had been incorrectly set to \"Specify Display Range\" instead of the default setting.
Ver. 1.04.2 October 01, 2015
- Added support for Windows 10.
- Added support for the TR-81.
Ver. 1.04.1 July 01, 2015
- Made some small fixes and improvements.
Ver. 1.04.0 March 01, 2015
- Added support for the TR-71nw and TR-72nw.
- Added a macro function.
- Other small fixes and improvements.
Ver. 1.03.0 July 01, 2014
- Updated the [Open with Search] function.
- Updated the function to view data for a specified range between cursors on axis.
- Revised the format of the file when saving in CSV (format of the lines that contain invalid data).
- Updated the [Data Filtering] function.
- Fixed a problem that occurred when opening recorded data of the TR-700W series loggers from the [Open with Search] menu, where channels could not be merged as expected.
- Other small fixes and improvements.
Ver. 1.02.3 March 01, 2014
- A function was added to select the graph print method in response to the problem that when printing graph, only the graph area was not printed. ([Print Graph] > [Page Setup] > [Specify the graph print method])
- Other small fixes and improvements.
Ver. 1.02.2 February 01, 2014
- Updated graph printing functions.
- Added proxy server settings.
- Other small fixes and improvements.
Ver. 1.02.0 November 01, 2013
- Added a function to set the user-defined default values for shapes (line, arrow, text box, rectangle, and speech balloon).
- Other small fixes and improvements.
Ver. 1.02.0 October 01, 2013
- Added support for the MCR-4TC.
- Added a function to set the user-defined default values for graph.
- Added a function to display the graph title.
- Other small fixes and improvements.
Ver. 1.01.0 September 01, 2013
- Added support for the TR-71wf and TR-72wf.
- Fixed a problem that occurred when closing the application, where an abnormal termination occurred depending on the PC environment.
- Other small fixes and improvements.
Ver. 1.00.7 September 01, 2013
- Fixed a problem that occurred when using text boxes and speech balloons.
- Other small fixes and improvements.
Ver. 1.00.6 August 01, 2013
- Fixed a problem where the Mean Kinetic Temperature (MKT) calculation was displayed incorrectly in Fahrenheit.
- Other small fixes and improvements.
Ver. 1.00.2 May 29, 2013
- The following functions were updated: Text Box, Speech Balloon, View/ Hide for Each Channel, File Read Speed, Graphing Speed
- The following problems were fixed: A change to the scale conversion equation was not reflected to the graph immediately.
- A change to the scale lines was not reflected immediately.
Ver. 1.00.1 April 10, 2013
- Fixed a problem that occurred when using [Open with Search] to search for voltage recorder type files (.vt7) over a specific time period, where the search result was not within the specified time period.
- Updated Help file information.
User Agreement
Disclaimers
- Although T&D Corporation has carried out operational tests on T&D Graph, hereafter referred to as "the software", we cannot guarantee that all operations will work properly under all conditions.
- T&D Corporation shall not accept any responsibility for any damage whether direct or indirect that results from the usage of the software.
- Specifications of the software may be subject to change and service may be terminated without advance notice to the user. In such a case T&D Corporation shall not be responsible for any damages whether direct or indirect from the inability to use the software.
- T&D Corporation has no obligation to correct any defects found in the software.
Copyright
- All copyrights for the software, including all of the programs and all related documents, are the sole property of T&D Corporation.
- The software is for use free of charge. Redistribution is permitted as long as it is to others for non-profit. In this case, all terms and conditions as written in the above disclaimers automatically transfer and hold true and valid for the party to which the program was redistributed. Please note that if you wish to commercially redistribute the program please contact your local distributor or T&D representative.
- The reprinting or redistribution for commercial purposes whether in part or in whole, in magazines or as a part of any product is strictly forbidden without the expressed consent of T&D Corporation. Any inquiries concerning commercial redistribution should be directed to your local distributor or T&D representative.
- Please do not attempt to make any changes or modifications to the software.