Adjustment Tools

Software that is used to make changes to the adjustment settings which operate on measured readings.


Software that is used to make changes to the adjustment settings which operate on measured readings.
Data loggers for which the setting has been made will record and display only the adjusted readings.

Compatible ProductsRTR500B Series, RTR-500 Series, RTR-601 Series
* RTR-601 Series is available for US only.
VersionVer. 1.31 (December 7, 2020)
File Nameapp_adjustmenttool-131-all-all.exe
File Size7.02 MB
Operating EnvironmentCompatible OS *1
Microsoft Windows 11 64bit English
Microsoft Windows 10 32/64bit English
CopyrightT&D Corporation
ReplicationCopying to another media is expressly forbidden
*1: For installation, it is necessary to have Administrator (Computer Administrator) rights.

Installation Procedure

  1. Double-click the update package to extract it to your hard drive.
  2. Follow instructions in Set up Program.
  3. Adjustment Tools will automatically be installed on the Hard Disk.

Revision History

Ver. 1.31 December 7, 2020

  • Added a feature to display the Adjustment Equation when you click “Get Settings”.
  • The software is now only available in English.
  • Added support for the RTR500B series.
  • Auto Calibration has been removed from the RTR-576 Settings.

Ver. 1.23 April 22, 2019

  • Updated the USB driver.

Ver. 1.22 December 14, 2018

  • Updated the USB driver.

Ver. 1.21 October 22, 2014

  • The display of the Auto Calibration Settings window in the RTR-576 tab was changed.

Ver. 1.20 December 18, 2013

  • Made compatible with the RTR-601 (for US only).

Ver. 1.10 October 16, 2012

  • Made compatible with the RTR-507 and RTR-576.

Ver. 1.00 July 01, 2011

  • First release.

User Agreement


  1. Although T&D Corporation has carried out operational tests on Adjustment Tools, hereafter referred to as "the software", we cannot guarantee that all operations will work properly under all conditions.
  2. T&D Corporation shall not accept any responsibility for any damage whether direct or indirect that results from the usage of the software.
  3. Specifications of the software may be subject to change and service may be terminated without advance notice to the user. In such a case T&D Corporation shall not be responsible for any damages whether direct or indirect from the inability to use the software.
  4. T&D Corporation has no obligation to correct any defects found in the software.


  1. All copyrights for the software, including all of the programs and all related documents, are the sole property of T&D Corporation.
  2. The software is for use free of charge. Redistribution is permitted as long as it is to others for non-profit. In this case, all terms and conditions as written in the above disclaimers automatically transfer and hold true and valid for the party to which the program was redistributed. Please note that if you wish to commercially redistribute the program please contact your local distributor or T&D representative.
  3. The reprinting or redistribution for commercial purposes whether in part or in whole, in magazines or as a part of any product is strictly forbidden without the expressed consent of T&D Corporation. Any inquiries concerning commercial redistribution should be directed to the Sales Department of T&D Corporation.
  4. Please do not attempt to make any changes or modifications to the software.
Page Top