T&D Recorder for Windows (TR-5,7xU)
This software has been specifically designed for use only with TR-57DCi, TR-57U, TR-50U2, TR-50U, TR-50C, TR-5i Series, TR-5S Series, TR-5 Series, TR-7Ui Series and TR-7U Series, allowing you to control all settings, data downloading and graph creation, as well as other functions.
Details
This software has been specifically designed for use only with TR-57DCi, TR-57U, TR-50U2, TR-50U, TR-50C, TR-5i Series, TR-5S Series, TR-5 Series, TR-7Ui Series and TR-7U Series, allowing you to control all settings, data downloading and graph creation, as well as other functions.
| Compatible Products | TR-5 Series, TR-57DCi, TR-57U, TR-50U2, TR-50U, TR-50C, TR-5S Series, TR-5i Series, TR-71U/72U, TR-71Ui/72Ui, TR-73U, TR-77Ui, TR-74Ui(*), TR-76Ui(*) (*)For TR-74Ui and TR-76Ui, only the data downloaded via TR-57DCi can be used with this software. |
|---|---|
| Version | Ver. 2.09 (April 26, 2023) |
| File Name | app-tdrec-tr5-7uwin-209-all.exe |
| File Size | 54.7 MB |
| Operating Environment | |
| Microsoft Windows 11 64bit English Microsoft Windows 10 32/64bit English | |
| The Microsoft .NET Framework 3.5 SP1 is required. | |
| Copyright | T&D Corporation |
| Replication | Copying to another media is expressly forbidden |
| *1: For installation, it is necessary to have Administrator (Computer Administrator) rights. | |
Read First
- Do not connect a device to your computer until the application has been installed.
- Normally during the application installation, the USB driver will also be installed automatically through the program. However, once a device has been connected to the computer, an incorrect USB driver may have been installed. In such a case, even if this application is installed, the device will not be recognized properly.
- If the device cannot be detected and recognized properly even after the application has been installed and the device has been connected to the computer, please reinstall the USB driver from the Device Manager Window. (For details about how to reinstall the USB driver, refer to “If Installation Fails” or “Installing the USB Device Driver” in the User’s Manual that comes with your device.)
Installation Procedure
- Start Windows and logon with administrative privileges.
- Please double click on the downloaded file.
- Specify the destination folder for the decompressed file, and continue the installation by following the directions as they appear.
- The updated version of “T&D Recorder for Windows (TR-5, 7xU)” will be automatically installed to your hard disk.
Revision History
Ver. 2.09April 26, 2023
-
- When opening the TR-5i/5S/5 series data in graph after the download, the application now:
- allows the user to add the file to an already opened graph in T&D Graph if the file extension (.trx or .pvx) was associated with T&D Graph.
- displays the message that prompts the user to install T&D Graph if the file (.trx or .pvx) has no association.
- When opening the TR-5i/5S/5 series data in graph after the download, the application now:
Ver. 2.08November 30, 2022
-
- Fixed a problem that could change the scale conversion value in the application when downloading data from the TR-57DCi menu.
- Fixed a problem in the Multi-scale Graph > Tools > [Scale, Unit Conversion] window, where the conversion value could be displayed with a leading "0". (e.g. 2.34 → "02.34")
- Fixed typo in the TR-51i/52i,TR-51S/52S,TR-55i,TR-51A/52 menu > [Download Recorded Data] tab > [Detailed Settings for Downloading Recording Data] window. (“strage folder” to “storage folder”)
Ver. 2.07(E) February 5, 2020
-
- Removed the unnecessary menu item (Display) for TR-57DCi.
- Changed the USB driver to fix the “USB Device Not Recognized” error on some Windows 10 computers.
Ver. 2.06(E) October 28, 2019
- Fixed a problem that occurred when downloading data from the TR-73U while in recording mode and before reaching the logging capacity, where the temperature, humidity, and barometric pressure of the last recording could all be returned as zero.
- Fixed a problem that caused the TR-55i\'s voltage, current, and pulse data to be shown as \"-----\" when printing graphs in Multi-Scale Graph.
Ver. 2.05(E) September 14, 2018
- Strengthened internal functions of TR-51i/52i to ensure recording settings are correct at the start of recording.
Ver. 2.04(E) March 02, 2018
- Fixed a problem where downloading data from the TR-5i series failed in a certain condition (when the checksum returns zero).
Ver. 2.03(E) September 27, 2016
- Added internal functions to the TR-5 series to ensure recording settings are correct and for recording start retry upon communication failure.
- Changed the default storage location for downloaded data files from TR-5 series data loggers.
- Clarified TR-50U/TR-50U2/RTR-57U/TR-57DCi USB error descriptions.
Ver. 2.02(E) March 21, 2013
- Fixed a problem that occurred when using the TR-55i. In the \"Detailed Settings\" box, when enabling Warning Monitoring and attempting to check the value \"after scale conversion\", the value after conversion would be treated as an error and the settings not completed correctly.
Ver. 2.01(E) January 01, 2013
- Revised to make compatible with Windows 8.
Ver. 2.00(E) March 01, 2012
- Made compatible with TR-55i and TR-50U2.
- Support has been added for TR-76Ui recorded data, collected with the TR-57DCi.
Ver. 1.91(E) April 12, 2011
- A problem was fixed whereby when the battery level for TR-51S/52S or TR-51i/52i fell below 20%, the battery level indicator would show higher value than actual.
Ver. 1.90(E) April 08, 2011
- Revised to make compatible with TR-71Ui/72Ui.
Ver. 1.81(E) February 24, 2011
- An error was corrected that occurred when downloading data to a PC from an TR-57U in which a large amount of recorded data was stored (about 70% full).
Ver. 1.80(E) November 25, 2010
- Revised to make compatible with TR-51i/52i.
- Revised to make compatible with TR-57DCi.
- Revised to make compatible with 64-bit Windows 7.
User Agreement
Disclaimers
- Although T&D Corporation has carried out operational tests on T&D Graph, hereafter referred to as "the software", we cannot guarantee that all operations will work properly under all conditions.
- T&D Corporation shall not accept any responsibility for any damage whether direct or indirect that results from the usage of the software.
- Specifications of the software may be subject to change and service may be terminated without advance notice to the user. In such a case T&D Corporation shall not be responsible for any damages whether direct or indirect from the inability to use the software.
- T&D Corporation has no obligation to correct any defects found in the software.
Copyright
- All copyrights for the software, including all of the programs and all related documents, are the sole property of T&D Corporation.
- The software is for use free of charge. Redistribution is permitted as long as it is to others for non-profit. In this case, all terms and conditions as written in the above disclaimers automatically transfer and hold true and valid for the party to which the program was redistributed. Please note that if you wish to commercially redistribute the program please contact your local distributor or T&D representative.
- The reprinting or redistribution for commercial purposes whether in part or in whole, in magazines or as a part of any product is strictly forbidden without the expressed consent of T&D Corporation. Any inquiries concerning commercial redistribution should be directed to your local distributor or T&D representative.
- Please do not attempt to make any changes or modifications to the software.