Please Read First

Base Unit	RTR500BW, RTR500BM, RTR500BC
Remote Unit	RTR501B/502B/503B/505B/507B (including L-type) RTR-500 Series Data Loggers(RTR-501/502/503/505/507S/574/576) can also be used except for the Bluetooth function.
Repeater	RTR500BC
Optical Communication	Communication carried out by placing a Remote Unit face down on the Base Unit connected to the PC
Wireless Communication	Short Range Wireless Communication For US: Frequency Range: 902 to 928MHz, RF Power: 7mW For EU: Frequency Range: 869.7 to 870MHz, RF Power: 5mW
Current Readings	The most recent measurements recorded by the Remote Unit
Recorded Data	Measurements stored in the Remote Unit

About Installing Wireless Devices

When installing wireless communication devices take special care in selecting locations so as to ensure proper communication. Note that even after a successful installation, due to changes in environmental conditions, communication errors may occur when restarting the system.

As far as possible, try to keep wireless communication devices away from metals and set them up in high unobstructed positions.

• Please take note that in many instances, walls, floors, stairs, fences and desks will contain metals. In order to carry out communication between indoor and outdoor units, please locate indoor units near a window so that radio waves can be easily transmitted.
• Please install these devices at least 30 cm away from walls or boards containing metal.
• If wireless communication devices are placed in a metal container such as a freezer or refrigerator, the possible wireless communication range will be shortened. In most cases radio waves are transmitted via doors and door openings so place devices as near to doors as possible.

As far as possible, keep the devices away from noise-emitting sources.

• Some industrial instruments, electronic devices (such as computers) and fluorescent lights generate noise. Please place units more than 1 meter away from such devices.
• Keep all wires as far away from wireless communication devices as possible. Please be careful about placing near any wiring or cables such as power supply cables, telephone wires or LAN cables.

Objects which contain lots of water, such as plants or soil, absorb radio waves. We highly recommend that such materials should not be placed between or near wireless communication devices.

• When measuring temperature in a greenhouse it has been reported that as plants grew, communication errors also increased.
• Do not place the device directly on the ground.

Do not place devices which are using the same communication frequency channel in the same area.

• If the same channel is used for multiple devices, not only will more communication errors occur, but battery life will also be shortened.
• If there is a possibility that devices with the same frequency channel will be in wireless communication at the same time, please make changes to the frequency channels so they are not the same.

Safety Precautions and Instructions

The following items should be strictly obeyed for the safe usage of the product, and for protecting yourself and other people from bodily harm and/or damage to property. Before use, please carefully read and follow the safety precautions outlined below.

To Prevent Serious Accidents

• This product has been designed for private and/or industrial use only. It should not be used in situations where strict safety precautions are necessary such as with medical equipment, or in systems directly or indirectly connected with human life or well-being.
• Use the product in the specified operating environment, and do not use in any other purposes than those intended.
• Do not disassemble, repair or modify the product and accessories.
• Do not use the product and accessories in any environment that is exposed to chemicals and harmful gases. Doing so may cause corrosion and/or other danger to the product. Also, coming in contact with hazardous substances may cause bodily harm to the user or people nearby.
• The RTR500B Series Base Units, temp-humidity sensors, and input modules (for RTR505B) are not water resistant. If liquid enters the product, immediately remove the power and stop using it.
• Do not touch the Base Unit or Repeater with wet hands. Also, do not connect or disconnect the power supply, cables, or sensors with wet hands. These actions may cause electric shock.
• Do not touch the product or AC adaptor during thunder and lightning. It may also cause electric shock.
• Do not drop or expose the product and accessories to a strong impact.
• Do not modify or cut the AC adaptor, sensor or cable. Also, do not twist, pull on or swing them.
• Please be careful not to touch the product and sensors during or after use in overly hot or cold environments. It may cause burns or frostbite.
• Place and store the product and accessories out of the reach of children.
• Do not use any power sources, sensors, or cables other than those specified.
• Do not put anything on top of the product, AC adaptor or cable. It may cause overheating.
• Make sure that the AC adaptor and cable are inserted fully, so as not to cause an improper connection. Also, when unplugging, do not pull the cord, but hold the connector to disconnect.
• If the unit produces heat, emits smoke or a strange smell, or makes unusual noises, immediately remove the power supply and stop using it. If the unit is connected to the PC, disconnect it before removing the power supply.
• Do not insert any foreign objects into any of the units' jacks, and make sure to remove dirt and dust before use.
• If the product is damaged, immediately stop using it. Continuing to use a damaged product may cause fire, burns, or injury.
• Do not use damaged or deteriorated AC adaptors and cables.
• When using the product in an environment where oil or water may splash, make sure to cover the product while maintaining ventilation. Exposure to oil, in particular, may cause the unit's casing to crack.
• Even if the unit is waterproof, water or foreign objects may enter in the following situations:
  • When the unit is submerged or exposed to moisture beyond the guaranteed waterproof rating.
  • When the sensor or input module is not connected.
  • When the rubber packing is damaged, or dirt, dust, or debris prevents a proper seal.
  • Involving a significant temperature change (especially from high to low) while the product is wet.

For Prevention of Serious Accidents with Batteries

Improper handling of batteries may cause leakage, overheating, fire or explosion, resulting in a serious accident or malfunction of the product.

• Never touch a leaking battery with bare hands. If it gets on your eyes, skin, or clothing, wash thoroughly with tap water. If it gets into your eyes, seek medical attention immediately.
• When installing batteries make sure that plus and minus are correct and do not short-circuit the terminals.
• When not using the product for long periods, make sure to remove the batteries.
• When resuming use of the product or changing the battery, make sure to use the correct type and size of battery.
• If you are using alkaline batteries, ensure they are within their recommended expiration date.
• Do not mix used and unused batteries.
• Do not use leaking batteries.
• The supplied battery is non-rechargeable. Do not attempt to recharge it.
• Never disassemble, modify, crush, or cut a battery.
• Do not peel off or damage the battery label.
• Do not use the unit with batteries installed in or near fire, or place it into heating cookers or high-pressure containers. Serious danger may result from the accidental heating of batteries.
• Do not use or store the unit with batteries installed in environments with extremely high temperatures, and/or high and low pressure.
• Please regularly check and replace any batteries installed as backup for an external power supply. Aging batteries may corrode and/or leak.
• Do not use counterfeit or imitation batteries.
• Dispose of used batteries in accordance with local regulations.

Safety Warnings for Installing the RTR500BM

• If there is electronic equipment nearby that uses high-precision control or weak radio signals, check with the equipment manufacturer or distributor about the effects of radio waves before installing the product.
  Examples of such devices for which care should be taken:
  Hearing aids, implantable pacemakers, implantable defibrillators, other medical electrical equipment, fire alarms, automatic doors, other automatically controlled equipment, and so on.
• Do not install the product in places crowded with people. Persons with cardiac pacemakers or defibrillators may be in close vicinity.
• When installing in an automobile, please ask the automobile manufacturer or seller about the influence of radio waves so as not to affect on-board electronic devices.
• Before using at gas stations, please confirm that use is acceptable and follow all directions set by the facility.
• Restrictions apply for use in aircrafts. Do not carry or stow in luggage with the power ON. Usage in an aircraft where prohibited may result in legal action being taken according to applicable laws.
• Do not use any antennas other than the one supplied with the product or an authorized optional antenna.

Places NOT Suitable for Installation and Storage

• Areas exposed to direct sunlight
• Areas subject to direct flames or heaters, as well as areas in which hot air accumulates and creates extremely high temperatures
• Areas exposed to static electricity
• Areas exposed to strong magnetic fields
• Areas exposed to dampness
• Areas subject to condensation or wet areas
• Areas exposed to excessive smoke, dust or dirt

Other Precautions

• Please be careful not to let a third party know of your registration code. The registration code cannot be reissued or changed.
• To prevent damage to the product from static electricity, remove static electricity from your body by touching metal around you (such as a door knob and window frame) before touching the unit.
• If the battery runs out or is removed and the LCD shuts off, all recorded data will be lost.
• Clean the product gently using a cloth dampened with a neutral detergent diluted in water. Do not use alkaline cleaners.
• When connecting the product to your PC, make sure to follow all warnings and directions from your computer manufacturer.
• Please confirm in advance the details regarding the network environment, the contract with an Internet service provider, and any other necessary equipment to enable network connection.

Compatibility with RTR-500 Series

The RTR500B series and the former RTR-500 series (discontinued) are compatible and can be used in any combination, but there are restrictions between some models. For details please see the following information.
T&D Website > Products > Compatibility Info for RTR500B and RTR-500 Series

Compliance Information

For FCC Model

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

ISED Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
This digital apparatus complies with CAN ICES-3(B)/NMB-3(B).

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. L'appareil ne doit pas produire de brouillage; 2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC/ISED Radiation Exposure Statement

This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person's body.

Cet équipement est conforme aux limites d'exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d'exposition aux fréquences radioélectriques (RF) CNR-102 de l'ISDE. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.

For CE Model

CE Statement

Hereby, T&D Corporation declares that this RTR500B Series is in compliance with the essential requirements and other relevant provisions of RE Directive 2014/53/EU and RoHS 2011/65/EU.
The full text of the EU Declaration of Conformity is available at:
https://tandd.com/manual/pdf/doc-rtr500b-series.pdf

Important Notes about Use of Wireless Products

Operations in the 5GHz WiFi band are restricted to indoor usage only.
Wireless products cannot be used in countries other than where those products have been approved for use, according to that country's wireless regulations.
T&D Corporation shall in no manner whatsoever take responsibility for the usage of these products, nor be liable in any manner for legal consequences stemming from the usage of these wireless products in unapproved areas.