T&D Recorder for Windows(RTR-5)
||T&D Recorder for Windows(RTR-5)
|This software has been specifically designed for use only with Thermo Recorder RTR-51/51A/52/52A/52Pt/53/53A, RVR-52, RVR-52A, RTR-57C, RTR-57U allowing you to control all settings, data downloading and graph creation, as well as other functions.
RTR-5 Series, RTR-57U
April 05, 2013
|Compatible OS (*1)(*2)
Microsoft Windows 8 32/64bit
Microsoft Windows 7 32/64bit
Microsoft Windows Vista 32bit (SP1 or later)
Microsoft Windows XP 32bit (SP3 or later)
|Display Languages (*3)
|The Microsoft .NET Framework 2.0 is required.(*4)
(*1) For installation, it is necessary to have Administrator (Computer Administrator) rights.
(*2) If you are using Windows 8, please note that our software is designed to be used in "Desktop" mode only.
(*3) We recommend using an operating system in the same language as the display language. Operation in different language is not guaranteed.
(*4) During the installation process of the software, if not present, .NET Framework 2.0 will be installed automatically.
Do not connect a device to your computer until the application has been installed.
Normally during the application installation, the USB driver will also be installed automatically through the program. However, once a device has been connected to the computer, an incorrect USB driver may have been installed. In such a case, even if this application is installed, the device will not be recognized properly.
If the device cannot be detected and recognized properly even after the application has been installed and the device has been connected to the computer, please reinstall the USB driver from the Device Manager Window. (For details about how to reinstall the USB driver, refer to “If Installation Fails” or “Installing the USB Device Driver” in the User’s Manual that comes with your device.)
For details about all operations, see the User's Manual of “T&D Recorder for Windows”.
Installing the Software
Please follow these procedures to install [T&D Recorder for Windows (RTR-5)]
Note: This is for system administrators' use only.
1. Start Windows and logon with administrative privileges.
2. Double-click the update package to extract it to your hard drive.
3. Follow instructions in Set up Program.
4. [T&D Recorder for Windows (RTR-5)] will automatically be installed on the Hard Disk.
Summary of changes
Version 1.46 : April 2013
- Fixed a problem where the RVR-52A could not be registered as a Remote Unit using the RTR-57U.
Version 1.45 : January 2013
- Revised to make compatible with Windows 8.
Version 1.44 : February 2011
- An error was corrected that occurred when downloading data to a PC from an RTR-57U in which a large amount of recorded data was stored (about 70% full).
Version 1.43 : August 2010
- Revised to make compatible with 64-bit Windows 7 (from August 31,2010).
- Revised to make compatible with Windows 7.
Discontinuation of Support for Earlier Versions of Windows
With the update of our software to be compatible with Windows 7, we have discontinued support for the following earlier versions of Windows: Windows98 SE / Windows Me.
For customers using any of the above previous versions of Windows, please download and use the following software designed to be compatible with those earlier versions.
Select your product
All of T&D wireless products meet any one of several different wireless compliant standards.
Please refer to the label on your product and select either of the following:
This software is for FCC type (US) only, and cannot be used with the CE type (EU) products. Before downloading, please check for the CE or FCC marking on the product.