Downloads

RTR-500W Firmware Update Tool
Informazioni sul software
Software RTR-500W Firmware Update Tool
Informazioni
 sul software
"RTR-500W Firmware Update Tool" è una applicazione che serve per aggiornare il firmware delle unità RTR-500NW/AW. Per le unità RTR-500NW/AW (modello FCC e modello CE).
Prodotti
 compatibili
RTR-500NW/AW
Versione 2.60
Data
 di rilascio
ottobre 31, 2014
Ambiente
 sistema
  operativo
Sistema operativo compatibile (*1)(*2)
Microsoft Windows 8 32/64bit
Microsoft Windows 7 32/64bit
Microsoft Windows Vista 32bit (SP1 o successivo)
display Lingue
inglese
Altro
 
(*1) Per l'installazione è necessario disporre dei diritti di amministratore (amministratore del computer).
(*2) Tutti i software T&D sono stati progettati per essere utilizzati come applicazioni desktop di Windows (interfaccia classica). Il loro funzionamento non è garantito se si utilizza la nuova interfaccia di Windows 8.
Nota
Before installing, please make sure that the device you are using is compatible with this update.
How to Check your RTR-500W Firmware Version
1. Aprire l'applicazione "RTR-500W Settings Utility" 2. Dall’elenco delle unit6agrave; RTR-500W visualizzato nella lista, selezionare quella di cui si desidera conoscere la versione firmware, quindi aprire il menù "Impostazioni unità di base ...". 3. Per verificare la versione del firmware selezionare il menù "Tabella impostazioni > Impostazioni unit6agrave; di base > Versione"
Procedura per l’aggiornamento del firmware
(1) Before executing the RTR-500NW/AW Firmware Update Tool, please make the following preparations:
- Connect the AC adaptor to the RTR-500NW/AW on which you wish to update the firmware. - Exit all T&D applications (such as the Settings Utility) running on your computer. - If you are using the RTR-500NW, remove the LAN cable from the device. - Using a USB cable, connect the RTR-500NW/AW to the PC in which "RTR-500W Firmware Update Tool" will be executed.
Before connecting a USB cable, make sure that the PC has the USB device driver installed. (By installing the application "RTR-500W for Windows", the USB device driver will also be installed.)
(2) Execute the downloaded "RTR-500W Firmware Update Tool". (3) Please follow the instructions on the screen to update the firmware.
Riepilogo delle modifiche
Version 2.60 : October 2014
- Fixed a problem where a warning continued to be issued when the warning condition only occurred for a short time.
- Fixed a problem where Remote Unit registration info was erased when a communication error occurred while registering a new Remote Unit or making changes to the Remote Unit Settings. (This is effective only for RTR-500W Settings Utility Ver.1.45 and above)
- Improved the stability of wireless communication with Remote Units when sending Current Readings and during Warning Monitoring.

Version 2.50 : June 2014
- Fixed a problem where FTP transmission failed if the file name exceeded 64 bytes.
- Fixed a problem where the FTP file name might be garbled when sending data to the FTP server.
- Fixed a problem where "?" could not be used in the Wireless LAN Password.

Version 2.40 : February 2014
- Fixed a problem that occurred when the auto-sending of recorded data function was set to ON, data downloaded from RTR-601 was sometimes missing.
- Fixed a problem that occurred when the warning mail transmission function was set to OFF in the Warning Settings, the contact output did not operate during a warning condition.

Version 2.30 : December 2013
- A change has been made to enable selection of the conditions for warning transmission.
- A change has been made to enable selection of the conditions for warning with contact output.
* The RTR-500NW/AW Firmware version 2.30 needs to be used in combination with the RTR-500W for Windows version 1.43 or later.

Version 2.20 : September 2013
Fixed the following problems:
- Daylight savings time was not reflected in e-mails sent by the RTR-500NW/AW.
- The character "%" could not be used in the User ID / Password for SMTP authentication.
- Unstable operation
* The RTR-500NW/AW Firmware version 2.20 needs to be used in combination with the RTR-500W for Windows version 1.42 or later.

Version 2.10 : July 2013
- In the "Auto-Sending of Recorded Data" settings, the required minimum spacing (or period) between transmissions was changed from 1 hour to 30 minutes.
* The RTR-500NW/AW Firmware version 2.10 needs to be used in combination with the RTR-500W for Windows version 1.42 or later.

Version 2.00 : February 2013
- Fixed a problem that occurred when using the Current Readings Monitor, where the amount of time since gathering the latest data was not displayed correctly.
- Fixed a problem where current readings info from Remote Units that are assigned specific Remote Unit Numbers, were sometimes omitted from the Current Readings Data (XML file).
- Fixed a problem where current readings within a specific temperature range were output incorrectly in the Current Readings Data (XML file).

Version 1.90 : dicembre 2012
- È stato risolto un problema a causa del quale i dati scaricati dal modello RTR-576 presentavano delle anomalie.
- È stato rivisto il testo da utilizzare nell’e-mail del report avvisi in modo che, quando lo stato dell’avviso cambia da ON a OFF durante un intervallo di tempo di valutazione degli avvisi, lo stato di avviso/recupero viene inoltrato in un messaggio.
- L’intensità del segnale dell’unità remota è stata aggiunta ai dati delle letture correnti (file XML).
- È stato risolto un problema a causa del quale la trasmissione di e-mail a volte non funzionava quando il protocollo POP veniva utilizzato prima del protocollo SMTP.
User Agreement