TR-7nw Firmware Update Tool

Before downloading, please check compatibility and operating environment specifications, as well as, other information such as applicable restrictions that may be included in "Read First".


Details This is an update program for the TR-7nw firmware.
Compatible Products TR-71nw , TR-72nw/72nw-H
Version Ver. 1.06 (January 27, 2017)
File Name app_tr7nw-firm-106-all-eng.exe
File Size 7.26 MB
Operating Environment Compatible OS *1
Microsoft Windows 10 32/64bit
Microsoft Windows 8 32/64bit
Microsoft Windows 7 32/64bit
Microsoft Windows Vista 32bit (SP1 or later)
Display Languages *2
English
Others
None
Copyright T&D Corporation
Replication Copying to another media is expressly forbidden
*1: For installation, it is necessary to have Administrator (Computer Administrator) rights.
*2: We recommend using an operating system in the same language as the display language. Operation in different language is not guaranteed.
Ver. 1.05 or lower
See below for how to check your firmware version depending on your interface method.
T&D WebStorage Service :
  1. After logging in, click the settings icon next to the TR-7nw device name to open the settings window.
  2. Read off the "Firmware" version next to the "Serial Number" located at the top of the window.
PC :
  1. Open T&D software "TR-7wf/nw for Windows" and connect your TR-7nw device via USB to the computer.
  2. Read off the "Firmware Version" value located at the lower left on the screen.
  • All recorded data will be deleted by updating the firmware. Please make sure to download all necessary data before update.
  • In the case of when XXX does not represent the latest firmware version, it means the update has failed. In the case of an update failure, please use the update tool as shown in the procedure below.
When using T&D WebStorage Service, you do not need to download the update tool.
By following the TR-7nw reset procedure shown below, the new firmware will be installed automatically.

Reset Procedure for Automatic Firmware Update
  1. When the recording is in progress (REC mark displayed on LCD), stop the recording by pressing and holding the REC/STOP button for at least 3 seconds.
  2. Turn off the TR-7nw by pressing and holding the PWR button.
  3. Pressing the DISPLAY, INTERVAL, and REC/STOP buttons at the same time, hold down the PWR button until all LCD display segments appear, then release all buttons.
  4. After resetting the TR-7nw, the installation of the new firmware will be completed in about 5 seconds. When the firmware is updated successfully, [LXXX] will appear on the LCD screen. (The XXX represents the version number of the firmware.)
Please read and agree to the User Agreement at the bottom of this page, and download the TR-7nw firmware update tool to perform the update.

If the USB device driver has not been installed on your computer, you will be prompted to install the driver during the TR-7nw firmware update. (Make sure to complete the driver installation before running the update tool.)
The XXX represents the version number of the firmware. Please read using the number of the appropriate version.
  1. Connect the TR-7nw via USB to the computer.
  2. Open the downloaded "TR-7nw Firmware Update Tool".
  3. Follow the instructions on the screen to update the firmware.
    If the firmware is updated successfully, [LXXX] will appear on the TR-7nw LCD screen when the power is turned on. The firmware update should take only a few minutes to complete.
Ver. 1.06 (January 27, 2017)
  • * When specifying a destination other than T&D WebStorage Service:
  • Fixed a problem where the TR-7nw readings could not be sent to the specified address when in the TR-7wf/nw Setting Tool the destination address was entered as [IP address]/[file name]. (e.g. "192.168.123.100/index.php")
Ver. 1.05 (November 22, 2016)
  • Fixed a problem where the measurement value was not displayed in the warning email when a warning occurred before changes made via T&D WebStorage Service to the warning settings were applied to the logger.
Ver. 1.04 (October 14, 2016)
  • Improved the communication methodology to be more robust in environments incurring frequent communications delays, such as when using mobile routers.
Ver. 1.03 (January 15, 2016)
  • A measure was taken to prevent the device from halting during operation.
Ver. 1.02 (September 08, 2015)
  • Fixed a problem where LAN connection could not be established in certain cases when using remote control commands.
Ver. 1.01 (August 24, 2015)
  • Implemented remote control commands via LAN socket communication.
  • When a warning email can not be issued due to communication failures or other issues, the unsent warning email will now be sent at the time of the next transmission of data.
User Agreement
Disclaimers
  1. Although T&D Corporation has carried out operational tests on TR-7nw Firmware Update Tool, hereafter referred to as "the software", we cannot guarantee that all operations will work properly under all conditions.
  2. T&D Corporation shall not accept any responsibility for any damage whether direct or indirect that results from the usage of the software.
  3. Specifications of the software may be subject to change and service may be terminated without advance notice to the user. In such a case T&D Corporation shall not be responsible for any damages whether direct or indirect from the inability to use the software.
  4. T&D Corporation has no obligation to correct any defects found in the software.
Copyright
  1. All copyrights for the software, including all of the programs and all related documents, are the sole property of T&D Corporation.
  2. The software is for use free of charge. Redistribution is permitted as long as it is to others for non-profit. In this case, all terms and conditions as written in the above disclaimers automatically transfer and hold true and valid for the party to which the program was redistributed. Please note that if you wish to commercially redistribute the program please contact your local distributor or T&D representative.
  3. The reprinting or redistribution for commercial purposes whether in part or in whole, in magazines or as a part of any product is strictly forbidden without the expressed consent of T&D Corporation. Any inquiries concerning commercial redistribution should be directed to the Sales Department of T&D Corporation.
  4. Please do not attempt to make any changes or modifications to the software.