MCR-4TC Firmware Update Tool

Before downloading, please check compatibility and operating environment specifications, as well as, other information such as applicable restrictions that may be included in "Read First".


Details This is an update program for the MCR-4TC firmware.
Compatible Products MCR-4TC
Version Ver. 1.01 (June 13, 2014)
File Name app_mcr4tc-update-101-all-eng.exe
File Size 4.81 MB
Operating Environment Compatible OS *1
Microsoft Windows 10 32/64bit
Microsoft Windows 8 32/64bit
Microsoft Windows 7 32/64bit
Microsoft Windows Vista 32bit (SP1 or later)
Display Languages *2
English
Others
None
Copyright T&D Corporation
Replication Copying to another media is expressly forbidden
*1: For installation, it is necessary to have Administrator (Computer Administrator) rights.
*2: We recommend using an operating system in the same language as the display language. Operation in different language is not guaranteed.
When turning on your MCR-4TC, the first screen that appears will display [Version x.x]. Check the displayed version number.
  1. Using a USB cable, connect the MCR-4TC to the PC in which “MCR-4TC Firmware Update Tool” will be executed.
  2. Execute the downloaded “MCR-4TC Firmware Update Tool”.
  3. Please follow the instructions on the screen to update the Firmware.
Ver. 1.01 (June 13, 2014)
  • Changed the vertical axis scale setting in graph view, where the max and min values can now be set in steps of 10 degrees (C/F).
  • Improved the communication protocol for communication between PC and a Slave unit via USB.
  • After starting or stopping recording with the [REC/STOP] button, you will now jump to the [Data List] menu.
  • Fixed a problem that occurred when exporting data to the SD memory card during endless recording, where an SD card write error would disable touch panel.
User Agreement
Disclaimers
  1. Although T&D Corporation has carried out operational tests on MCR-4TC Firmware Update Tool, hereafter referred to as "the software", we cannot guarantee that all operations will work properly under all conditions.
  2. T&D Corporation shall not accept any responsibility for any damage whether direct or indirect that results from the usage of the software.
  3. Specifications of the software may be subject to change and service may be terminated without advance notice to the user. In such a case T&D Corporation shall not be responsible for any damages whether direct or indirect from the inability to use the software.
  4. T&D Corporation has no obligation to correct any defects found in the software.
Copyright
  1. All copyrights for the software, including all of the programs and all related documents, are the sole property of T&D Corporation.
  2. The software is for use free of charge. Redistribution is permitted as long as it is to others for non-profit. In this case, all terms and conditions as written in the above disclaimers automatically transfer and hold true and valid for the party to which the program was redistributed. Please note that if you wish to commercially redistribute the program please contact your local distributor or T&D representative.
  3. The reprinting or redistribution for commercial purposes whether in part or in whole, in magazines or as a part of any product is strictly forbidden without the expressed consent of T&D Corporation. Any inquiries concerning commercial redistribution should be directed to the Sales Department of T&D Corporation.
  4. Please do not attempt to make any changes or modifications to the software.