Support Information
Update Report
June 27, 2012
WDR-3 Script Update Info (Ver. 1.23)
In order to fix the following problems in the WDR-3, we have released this update program for the script.
Affected Products
WDR-3 Script Ver.1.22 or lower
Modification Details
- Fixed a problem that occurred for the ON/OFF Signal measurement. When the WDR-3 was turned off and back on again, the recorded time of polarity change would be shown as occurring in the year 2003, instead of the actual date.
How to Update
Follow the instructions as noted below for updating the "WDR-3 for Windows" Software and the "WDR-3 Firmware / Script".
If one of the versions of either the software "WDR-3 for Windows" or the "WDR-3 Firmware / Script" is different from the other, the product will not function properly. When carrying out the update please confirm that the versions of all three parts (software, firmware, script) have been updated to the latest version for each.
Versions after updates should be as follows:
Software "WDR-3 for Windows" should be 1.17
Firmware should be 2.10
Script should be 1.23
Versions after updates should be as follows:
Software "WDR-3 for Windows" should be 1.17
Firmware should be 2.10
Script should be 1.23
Download the Latest Update Program
Contact Us
For more information, questions or comments about this subject please contact your local distributor. If you are unsure of your local distributor and cannot contact them, please contact our Main Office in Japan: